Are you looking for the best temco hydraulic knockout punch? Based on expert reviews, we ranked them. We've listed our top-ranked picks, including the top-selling temco hydraulic knockout punch.
We Recommended:
- Powerful 9 US TRUE TON Punching Capacity. Compatible with GREENLEE and other domestic punch tooling 3/4"-16 threads.
- 6 Die Sets for conduit fitting size: ½, ¾, 1, 1¼, 1 ½, 2". All dies have laser engraved alignment marks for easy and precise positioning.
- Punching Thickness Capacity: 1/8 inch (11 ga) Steel Punching Capacity, 1/16 inch Stainless Steel.
- Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass, Plastic
- 5 Year Warranty from a well-known American name. NON-GENERIC
- True 13 US ton hydraulic knockout punch with 10 dies. All dies have laser engraved alignment marks for easy and precise positioning. Compatible with...
- 10 dies for conduit fitting sizes: ½", ¾", 1", 1¼", 1 ½", 2", 2 ½",3", 3 ½", 4" - Complete kit comes in a rugged storage case with a 5 Year...
- Slug splitting designed dies for easy slug removal that leaves a round hole with clean edges and a uniform size is provided on punch sizes ½", ¾",...
- Deep Draw dies that are designed with an optimized angle on the cutter face that requires less force to make the cut, reducing operator and tool...
- Punching Thickness Capacity: 1/8 inch (11 ga) Steel, 1/16 inch Stainless Steel Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys...
- Hydraulic unit provides true 13 US ton hydraulic punching force.
- Compatible with GREENLEE and other domestic punch tooling, draw studs or arbors that use - 3/4-16 & 3/8-23 thread sizes
- Hydraulic unit is the same unit used for TEMCo TH0037 Knockout Punch.
- Conduit Fitting Size: 2-1/2", Actual Hole Size: 3"
- Required Punching Force: 13 US Tons
- Fits Draw Stud Size: 3/4"-16 (TEMCo THA001)
- Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel
- Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use...
- Manual drive knockout punches, for use with ratchet, wrench, or electric driver. Conduit punch sizes: 1/2",3/4",1",1-1/4",1-1/2",2"
- Capacity: Mild steel plate through 10 gauge (3.5mm) Works to punch Mild steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass and plastic.
- Slug splitting design on punches allows for easier slug removal – the smooth operation leaves the round hole with clean edges and a uniform size....
- Kit comes in a rugged storage case with a 19mm Socket, to be used with 1/2" ratchet. Storage case is designed with a secure-closing lid for keeping...
- 3/4", 1", 1-1/4", 1-1/2", 2" die sets compatible with THA001 draw stud allowing for use in TEMCo hydraulic drivers TH0004 and TH0037. Also compatible...
- Conduit Fitting Size: 3", Actual Hole Size: 3.5"
- Required Punching Force: 13 US Tons
- METRIC THREAD - Fits Draw Stud Size: M20x1.5mm (TEMCo THA010 and THA011). This DOES NOT fit TEMCo draw stud THA001 or THA100.
- Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel
- Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use...
- Conduit Fitting Size: 3-1/2", Actual Hole Size: 3.93"
- Required Punching Force: 13 US Tons
- Fits Draw Stud Size: 3/4"-16 (TEMCo THA001)
- Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel
- Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use...
- Conduit Fitting Size: 1/2", Actual Hole Size: 0.86"
- Required Punching Force: 9 US Tons
- Fits Draw Stud Size: TEMCo THA012, THA013, THA015 or any draw stud with a diameter of 0.430" (10.90mm) NOTE: This die set DOES NOT have threads.
- Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel
- Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use...
- Conduit Fitting Size: 3-1/2", Actual Hole Size: 3.93"
- Required Punching Force: 13 US Tons
- Fits Draw Stud Size: M20x1.5mm (TEMCo THA010). Fits Driver: Old style TEMCo TH0037
- Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel
- Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use...
- Conduit Fitting Size: 1", Actual Hole Size: 1.33"
- Required Punching Force: 9 US Tons
- Fits Draw Stud Size: 3/4"-16 (TEMCo THA001)
- Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel
- Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use...
- Conduit Fitting Size: 4", Actual Hole Size: 4.5"
- Required Punching Force: 13 US Tons
- Fits Draw Stud Size: M20x1.5mm (TEMCo THA010). Fits Driver: Old style TEMCo TH0037
- Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel
- Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use...
- Conduit Fitting Size: 3/4", Actual Hole Size: 1.05"
- Required Punching Force: 9 US Tons
- Fits Draw Stud Size: TEMCo THA012, THA013, THA015 or any draw stud with a diameter of 0.430" (10.90mm) NOTE: This die set DOES NOT have threads.
- Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel
- Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use...
- Conduit Fitting Size: 1-1/2", Actual Hole Size: 1.93"
- Required Punching Force: 9 US Tons
- Fits Draw Stud Size: M20x1.5mm (TEMCo THA010). Fits Driver: Old style TEMCo TH0004, TH0037
- Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel
- Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use...
- Conduit Fitting Size: 1-1/2", Actual Hole Size: 1.93"
- Required Punching Force: 9 US Tons
- Fits Draw Stud Size: 3/4"-16 (TEMCo THA001)
- Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel
- Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use...
- Conduit Fitting Size: 1-1/4", Actual Hole Size: 1.69"
- Required Punching Force: 9 US Tons
- Fits Draw Stud Size: 3/4"-16 (TEMCo THA001)
- Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel
- Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use...
- Compatible with TEMCo Industrial, Greenlee, and many other drivers.
- Made of tough hardened tool steel.
- Comes with Metric to English conversion draw stud.
- Max punching thickness of 1/8" (11 ga) Steel, 1/16" Stainless Steel.
- 5 Year Guarantee or 1 Year no questions asked return policy - we pay for shipping both ways.
- Square DIN Punch Die Set for 45mm x 45 mm (1/16 DIN)
- Fits TEMCo Industrial, Greenlee and other English punch sets (3/4-16") OR Fits other import metric punch sets (20 x 1.5mm). Draw studs and spacers are...
- Required Punching Force: 12 US Tons
- Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft...
- TEMCo Industrial's 1 year no-questions-asked return policy and 5 year warranty
- Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13.
- Eight Dimple Dies: 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2". (Actual Hole Size)
- This dimple die set creates flared holes most commonly used on automobile parts fabrication. Cut out holes inherently provide reduced weight of the...
- Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish.
- This dimple die set works with a hydraulic driver and cylinder tool most commonly used with hydraulic knockout sets like our TEMCo THA043 and TH0372.
- 5 Year Guarantee! Rated For: 3/16" Mild Steel. Recommended Driver Tonnage: 9.
- Punch & Die Sizes: 0.625", 0.75", 0.875", 1.00", 1.125", 1.25", 1.375", 1.50", 1.625", 1.75", 1.875", 2.00". Note: These dies produce the measured...
- Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel
- Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish.
- Recommended Driver Tool: TEMCo Industrial TH0004 Hydraulic Knockout Punch Set.
- THA100 3/4"-16 English Thread draw stud.
- THA100 length is 4.84”
- Draw studs is designed for use with the TEMCo TH0004 and TH0037 hydraulic knock out punches.
- Draw Stud can also be used for other knockout punch sets with the same thread configuration.
- Full 5 year Warranty
Having trouble finding a great temco hydraulic knockout punch?
This problem is well understood by us because we have gone through the entire temco hydraulic knockout punch research process ourselves, which is why we have put together a comprehensive list of the best temco hydraulic knockout punchs available in the market today.
After hours of searching and using all the models on the market, we have found the best temco hydraulic knockout punch for 2023. See our ranking below!
How Do You Buy The Best Temco Hydraulic Knockout Punch?
Do you get stressed out thinking about shopping for a great temco hydraulic knockout punch? Do doubts keep creeping into your mind?
We understand, because we’ve already gone through the whole process of researching temco hydraulic knockout punch, which is why we have assembled a comprehensive list of the greatest temco hydraulic knockout punch available in the current market. We’ve also come up with a list of questions that you probably have yourself.
John Harvards has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for temco hydraulic knockout punch that you consider buying. Your questions might include the following:
- Is it worth buying an temco hydraulic knockout punch?
- What benefits are there with buying an temco hydraulic knockout punch?
- What factors deserve consideration when shopping for an effective temco hydraulic knockout punch?
- Why is it crucial to invest in any temco hydraulic knockout punch, much less the best one?
- Which temco hydraulic knockout punch are good in the current market?
- Where can you find information like this about temco hydraulic knockout punch?
We’re convinced that you likely have far more questions than just these regarding temco hydraulic knockout punch, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for temco hydraulic knockout punch, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible temco hydraulic knockout punch. Make sure that you are only using trustworthy and credible websites and sources.
John Harvards provides an temco hydraulic knockout punch buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information.
How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available temco hydraulic knockout punch currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of temco hydraulic knockout punch has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an temco hydraulic knockout punch?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your temco hydraulic knockout punch.
- Customer Ratings: Number ratings grade temco hydraulic knockout punch objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their temco hydraulic knockout punch.
- Product Quality: You don’t always get what you pay for with an temco hydraulic knockout punch, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an temco hydraulic knockout punch is should be an indication of how long it will work out for you.
John Harvards always remembers that maintaining temco hydraulic knockout punch information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding temco hydraulic knockout punch is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly!
FAQ:
Q: What is the capability of the Temco th0004 Hydraulic punch?
A: Capacity: Mild steel plate through 10 gauge (3.5mm) Works to… The TEMCo TH0004 Hydraulic Knockout Punch has a powerful 9 US TRUE TON punching capacity and produces perfect, uniform holes every time. Its compact design is especially designed for field use on construction sites and maintenance jobs.
Q: What is the best hydraulic knockout punch?
A: The TEMCo TH0004 Hydraulic Knockout Punch has a powerful 9 US TRUE TON punching capacity and produces perfect, uniform holes every time. Its compact design is especially designed for field use on construction sites and maintenance jobs. Quick, effortless…
Q: What is Temco th0037?
A: The TEMCo TH0037 Hydraulic Knockout Punch has a powerful 13 US TRUE TON punching capacity and produces perfect, uniform holes every time. Its compact design is especially designed for field use on construction sites and maintenance jobs. Quick,… Hydraulic unit provides true 13 US ton hydraulic punching force.
Q: What is the size of a knockout punch?
A: This punch units are complete units consisting of the 1 inch actual size punch and draw stud makes a 1 inch sized hole. Knockout punch can be used with ratchet, wrench, or electric driver. Capacity: Mild steel plate through 10 gauge (3.5mm) Works to…