Are you looking for the best Spindle And Hub Kits? Based on expert reviews, we ranked them. We've listed our top-ranked picks, including the top-selling Spindle And Hub Kits.
We Recommended:
Bestseller No. 1
The ROP Shop (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle
- Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle
- Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A...
- Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal...
- Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair
- Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your...
Bestseller No. 2
SOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 5-4.5" Bolt Circle Hub
- 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
- Spindle includes spindle nut, spindle washer, and cotter pin.
- 5-4.5" BT8 hub pre raced and studded.
- Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
- Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
Bestseller No. 3
RIGID HITCH INCORPORATED Trailer Hub Kit (BT-150-F) 5 Bolt on 4-1/2 Inch Circle - Fits 1" and...
- Complete assembly with bearings, seal, dust cap, cotter pin and lug nuts
- Fits both 1" and 1-1/16" diameter straight spindles
- Hub measures 4-1/4 inches tall (through center of hub)
- 2,000 lbs capacity - 1/2-20 thread - 5 bolt on 4-1/2 inch bolt circle
Bestseller No. 4
The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle
- Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle
- Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A...
- Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal...
- Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair
- Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your...
Bestseller No. 5
The ROP Shop Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle
- Replacement Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle
- Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A...
- Includes - (1) Idler Hub with Lug Nuts, (1) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (2) Inner/Outer Bearings, (1) Double-lip Grease Seal...
- Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair
- Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your...
Bestseller No. 6
RIGID HITCH INCORPORATED Trailer Hub Kit (BT-100-F) 4 Bolt on 4 Inch Circle - Fits 1" and 1-1/16"...
- Complete assembly with bearings, seal, dust cap, cotter pin and lug nuts
- Fits both 1" and 1-1/16" diameter straight spindles
- Hub measures 4-1/4 inches tall (through center of hub)
- 2,000 lb capacity - 1/2-20 thread - 4 bolt on 4 inch bolt circle
Bestseller No. 7
HD Switch Front Wheel Bearings Kit Replaces John Deere L100 L105 L108 L110 L120 L130 Bushing to...
- Complete Conversion Kit for 2 Wheels. Plus FREE Hub Caps
- For Wheels with 1.375" Rim and 0.750" Axle Sizes
- Tough Heat Treated Thrust Washers
- Includes E-Clips Just in Case You Damage or Loose Yours
- Smooth Sealed Bearings - No More Grease
Bestseller No. 8
RIGID HITCH INCORPORATED Pair of 5-Bolt on 4-1/2 Inch Hub Assembly (AKSQ-2000545) Includes (2)...
- Pair of 1" straight spindles includes castle nuts and cotter pins.
- Bearings included - (4) L-44643 1" inside dimension.
- Hubs have pre-installed pressed in races.
- Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2.59", flange diameter 6-1/2" and measures 4-1/4" tall (through center of hub)
- Spindles feature a SQUARE 1-1/2" stock diameter with a bearing surface of 1 Inch
Bestseller No. 9
RIGID HITCH INCORPORATED Trailer Hub Kit (Shorty) 5 Bolt on 4-1/2" Bolt Circle - Fits 1" and 1-1/16"...
- “SHORT” Hub – Measures Approximately 3.5″ Tall (through center of hub)
- This hub is DESIGNED SPECIFICALLY FOR SHORT SPINDLE 1-1/16" straight axles. Please measure your spindle before ordering.
- Thread 1/2"-20 - Hub comes equipped with pressed in races
- 5 Bolt on 4-1/2" bolt circle
- Complete assembly with bearings, seal, dust cap, cotter pin and lug nuts
Bestseller No. 10
M-Parts 3,500-lb Trailer Hub Kit, 5 Bolt 5" x 4.5" Replacement Trailer Hub Kit for 3,5000-lb Trailer...
- TRAILER HUB KIT - M-Parts Trailer Idler Hub Kits 5 on 4.5' for 3,500 lbs Axle
- BOLT PATTERN - 5 on 4.5' bolt pattern idler hub with 1/2'-20 studs and bearing races installed
- HARDWARE - L-68149 inner bearing- (1-3/8 inch inside dimension) / L-44649 outer bearing- (1-1/16 inch inside dimension), Grease seal - (2.56 inch O.D...
- INCLUDED - 5 on 4.5 Idler Hub and Hardware
- M-PARTS AUTO- M-Parts Auto specializes in trailer parts & accessories using the highest quality materials
Bestseller No. 11
LIBRA Set of 2 Trailer Idler Hub Kits 5 on 4.5 for 1-1/16" Straight Spindle 2000lbs Axles- 22016K
- Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle
- Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed
- Kits also includ: 4x L44649 outer cone bearings, 2x Grease seals, 2x E Z lube grease caps with rubber plug; 10 cone wheel nuts 1/2"-20 thread
- pls noted, this hub fit straight spindles, not for tapered spindles
Bestseller No. 12
SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 4-4" Bolt Circle Hub
- 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
- Spindle includes spindle nut, spindle washer, and cotter pin.
- 4-4" BT8 hub pre raced and studded.
- Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
- Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
Bestseller No. 13
Bestseller No. 14
Trailer Hub Spindle Nut Washer Kit
- 2 6-Slot Spindle Nuts 1"-14
- 2 1" D Washer2
- 2 1" Tang Washers
Bestseller No. 15
JDMSPEED 2 Trailer Idler Hub Kits 5 on 4.5" Replacement for Axle 1-1/16" Bearings 2000 lbs - 22016K
- Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle
- Kits also include: 4x L44649 outer cone bearings, 2x Grease seals 1-1/16", 2x E Z lube grease caps with rubber plug; 10 cone wheel nuts 1/2"-20 thread
- Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed
- Note: This hub fit straight spindles, not for tapered spindles
- Easy Lube; Replacement For Most 2,000 lb Hubs
Bestseller No. 16
Bestseller No. 17
ANPART Trailer Hub Kit for 2000 lbs axle 1 1/16 - L44649 Spindle - 4 to 4 Bolt Idler Hub & 1 Round...
- Compatibility : Fits 2000 lb. Axles, Works on Dexter and other brands 2000lbs axle in the market
- High Load Capacity and Accuracy: Has super load capacity and provides precise guidance for wheel rotation
- High-performance Seal: Has good heat r-esistance, mud and sewage r-esistance, so it is suitable for a variety of complex and harsh environments
- Spray Paint Protection Layer: Our Trailer Hub are uniformly surface-painted, which can greatly reduce or avoid oxidative c-orrosion on the wheel...
- Before You Buy: Please make sure the hub assembly matches your model. There are no installation instructions for this product, you can search for...
Bestseller No. 18
SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 5-4.5" Bolt Circle Hub
- 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
- Spindle includes spindle nut, spindle washer, and cotter pin.
- 5-4.5" BT8 hub pre raced and studded.
- Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
- Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
Bestseller No. 19
Weld-In Hub and Spindle Kit
- HEAVY DUTY SPINDLE- 8.5 Inch Tall 1.25" OD at the Base Weld-in Trailer Spindle Rated for 1000 LBs
- HEAVY DUTY HUB - 2.5 Inch Outside Diameter, 4 Inch Long Hub, with a 3/8 Inch Thick Wall Between Areas CNC Machined for Tappered Roller Bearings
- INCLUDES - Spindle, Hub, Two Bearings and Races, Seal, Dust Cap, Grease Zerk, Nut and Cotter Pin
- MULTIPLE USES - Often Used in Tire Carriers, We Have Also Seen These Used in Rotating Weld Fixtures, Lifting Devices, and Other Designs Where a High...
- AMERICAN MADE PRODUCT - VETERAN OWNED BUSINESS
Bestseller No. 20
ANPART Trailer Hub Kit for 2000 lbs axle Trailer Axle Hub Wheel Bearing Kits 1 1/16 - L44649 Spindle...
- Compatibility : Fits 2000 lb. Axles, Works on Dexter and other brands 2000lbs axle in the market
- High Load Capacity and Accuracy: Has super load capacity and provides precise guidance for wheel rotation
- High-performance Seal: Has good heat r-esistance, mud and sewage r-esistance, so it is suitable for a variety of complex and harsh environments
- Spray Paint Protection Layer: Our Trailer Hub are uniformly surface-painted, which can greatly reduce or avoid oxidative c-orrosion on the wheel...
- Before You Buy: Please make sure the hub assembly matches your model. There are no installation instructions for this product, you can search for...
Having trouble finding a great Spindle And Hub Kits?
This problem is well understood by us because we have gone through the entire Spindle And Hub Kits research process ourselves, which is why we have put together a comprehensive list of the best Spindle And Hub Kitss available in the market today.
After hours of searching and using all the models on the market, we have found the best Spindle And Hub Kits for 2023. See our ranking below!
How Do You Buy The Best Spindle And Hub Kits?
Do you get stressed out thinking about shopping for a great Spindle And Hub Kits? Do doubts keep creeping into your mind?
We understand, because we’ve already gone through the whole process of researching Spindle And Hub Kits, which is why we have assembled a comprehensive list of the greatest Spindle And Hub Kits available in the current market. We’ve also come up with a list of questions that you probably have yourself.
John Harvards has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Spindle And Hub Kits that you consider buying. Your questions might include the following:
- Is it worth buying an Spindle And Hub Kits?
- What benefits are there with buying an Spindle And Hub Kits?
- What factors deserve consideration when shopping for an effective Spindle And Hub Kits?
- Why is it crucial to invest in any Spindle And Hub Kits, much less the best one?
- Which Spindle And Hub Kits are good in the current market?
- Where can you find information like this about Spindle And Hub Kits?
We’re convinced that you likely have far more questions than just these regarding Spindle And Hub Kits, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Spindle And Hub Kits, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Spindle And Hub Kits. Make sure that you are only using trustworthy and credible websites and sources.
John Harvards provides an Spindle And Hub Kits buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information.
How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Spindle And Hub Kits currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Spindle And Hub Kits has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Spindle And Hub Kits?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Spindle And Hub Kits.
- Customer Ratings: Number ratings grade Spindle And Hub Kits objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Spindle And Hub Kits.
- Product Quality: You don’t always get what you pay for with an Spindle And Hub Kits, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Spindle And Hub Kits is should be an indication of how long it will work out for you.
John Harvards always remembers that maintaining Spindle And Hub Kits information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Spindle And Hub Kits is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly!
Related Post:
- Best 2000 Blazer 2wd Spindle
- Best Jenny Lind White Spindle Crib
- Best Jenny Lind White Spindle Crib
- Best Toro Z Master Spindle Bearings
- Best Air Cooled Spindle
- Best Triton Tsps450 Oscillating Spindle Sander
- Best Air Cooled Spindle Motor
- Best Wen Spindle Sander Review
- Best 2 2 Kw Water Cooled Spindle
- Best 2 2kw Water Cooled Spindle