Are you looking for the best Jmt 30a Brushless Esc? Based on expert reviews, we ranked them. We've listed our top-ranked picks, including the top-selling Jmt 30a Brushless Esc.
We Recommended:
Bestseller No. 1
30A RC Brushless Motor Electric Speed Controller ESC 3A UBEC with XT60 & 3.5mm bullet plugs
- Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
- 5v/3A UBEC (Very Efficient) - ESC can power receiver and servos
- LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4V - 16.8V
- Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
- Programmable - Programming Card or using Transmitter
Bestseller No. 2
BGNing A2212 1400kv Brushless Outrunner Motor 10t+ 30a Speed Controller ESC,Rc Aircraft Kk...
- 1400kv Brushless Motor
- DT-30A Brushless ESC
- Max Efficiency: 80%
- Motor Dimensions: 27.5 x 30mm
- Shaft Diameter: 3.17mm
Bestseller No. 3
Hobbypower SimonK 30A ESC Brushless Speed Controller BEC 2A for Multirotor Quadcopter(4 Pack)
- 30A SimonK firmware Brushless ESC
- Soldered with 3pcs 3.5mm gold female plug, very convenient to connect motor.
- Highest accuracy with Crystal Oscillator (Temperature won't affect the PWM operating range like other cheap ESC's).
- Super high refresh rate, no buffering of the input signal, resulting in more than 490Hz response rate.
- 16KHz motor frequency, giving fastest response of the motor, and quietest operation as well (no 8KHz squeal).
Bestseller No. 4
BGNing 2212 2200kv Brushless Motor Outrunner W/Mount 6t + 30a ESC Controller for Drone Rc Quadcopter...
- 212 2200kv Brushless Motor
- DT-30A Brushless ESC
- KV: 2200
- Max Efficiency: 80%
- Motor Dimensions: 27.5 x 30mm
Bestseller No. 5
powerday 30A Brushless Speed Controller ESC for RC Helicopter Airplane Multirotor(Pack of 4pcs)
- -Input Voltage: 2-3cells lithium battery or 5-9 cells NiCd/NIMh battery.
- -Compatible with: 400-450 helicopters / Aircraft or Quad-Rotor Multi RC Helicopter
- -Size: 45mm (L) * 24mm (W) * 11mm (H).
Bestseller No. 6
abcGoodefg A2212 1400KV RC Brushless Motor 30A ESC Motor SG90 Micro Servo 8060 Propeller Set for RC...
- A2212 1400kv Brushless Outrunner Motor with connector, 12A/60s, fit for Battery 2-3 Li-Poly.
- 30A ESC BEC output: linear mode: 5V, 2A,Number of battery sections: 2-3S LiPo. With T plug and 3.5mm banana connectors,effectively avoid welding...
- SG90 Servo, 4.8V-6V, 0.12 sec / 60 deg (4.8 V).
- Suitable for RC Glider Quadcopter Helicopter Aircraft Copter Multi-copter.
- Package Included: 1 X A2212 1400kv Brushless Motor; 1 X 30A Brushless ES; 2 X SG90 9G Servos; 1 Pair 8060 Propellers and other mounting Accessories.
Bestseller No. 7
ZTW 30A ESC with 5V/2A BEC Output for Fixed Wing Airplane 2-4S LIPO (30A BEC)
- Super smooth, accurate and programmable throttle linearity and throttle response.
- Over temperature protection ,low voltage cut off protection ,signal loss protection and so on.
- Strong BEC output 2A/5V continuous and peak to 3A.
- Supporting high RPM motors and programmable by programming card and transmitter .
- High efficiency with low resistance and low heat MOSFET and CPU
Bestseller No. 8
QWinOut 2-4S 30A RC Brushless ESC Simonk Firmware Electric Speed Controller with 5V 3A BEC with...
- NOTE: 1. Since 2020.07.05, this items was soldered with 3.5mm Female banana connectors, effectively avoid welding problems; 2. We have set up the...
- Input voltage:2-4 S; BEC: 5V 3A; Working current: 30A / 40A (Optional on my shop)
- Universal SimonK Firmware 30A/40A ESC Brushless Speed Controller, super simple. Small size combined with light weight for easy installation. (30A/40A...
- Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying. Extreme low resistance...
- Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.
Bestseller No. 9
Hobbypower SimonK 30A ESC Brushless Speed Controller BEC 2A for Multirotor Quadcopter
- Soldered with 3pcs 3.5mm gold female plug, very convenient to connect motor.
- Highest accuracy with Crystal Oscillator (Temperature won't affect the PWM operating range like other cheap ESC's).
- Super high refresh rate, no buffering of the input signal, resulting in more than 490Hz response rate.
- Super simple, foolproof operation! Nothing to program other than the throttle range.
- 16KHz motor frequency, giving fastest response of the motor, and quietest operation as well (no 8KHz squeal).
Bestseller No. 10
Hobbypower 30a Brushless Speed Controller ESC for X525 Multicopter Helicopter Airplane
- Regardless the throttle stick position, the motor will not spin after battery connected.
- Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
- Brake Setting: brake enabled / brake disabled.
- Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).
- Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost
SaleBestseller No. 11
BGNing 2Pack A2212 Brushless Outrunner Motor 1400kv/2200kv with Mount 10t/6t+ 30a Speed Controller...
- 2212 2200kv Brushless Motor+ 2212 1400kv Brushless Motor
- 2Pack DT-30A Brushless ESC
- Max Efficiency: 80%
- Max Efficiency Current: 4-10A (Less than 75%)
- Motor Dimensions: 27.5 x 30mm
Bestseller No. 12
ZTW Shark Series 40A Brushless ESC with BEC 3A/5V Bi-Direction and Water Cooling System for rc Boat...
- Super smooth, accurate and programmable throttle linearity and throttle response.
- Over temperature protection ,low voltage cut off protection ,signal loss protection and so on.
- Strong BEC output 3A/5.5V continuous and peak to 5A.
- Supporting high RPM motors and programmable by programming card and transmitter.
- High efficiency with low resistance and low heat MOSFET and CPU.
Bestseller No. 13
FLYCOLOR 30A Brushless ESC 2-4S with 5V 1A BEC for RC F450 Airplane Durable Quadcopter Helicopter
- Universal Firmware 30A ESC Brushless Speed Controller, super simple. Small size combined with light weight for easy installation.
- Support OneShot 125. High performance MCU. Mini size, lighter in weight. Built-in BEC, high output power, less power loss.
- Multiple protection features: Outstanding blocking protection, protect equipment and personal safety. Abnormal startup protection, over-heat...
- The firmware is specialized for multi-rotor , fast throttle response during flying.Strong self-adaptable firmware, 4 timing options.
- Support frequency of throttle signal to 500Hz max , compatible with various kinds of flight control. ( ≥500Hz throttle signal is nonstandard signal...
Bestseller No. 14
FEICHAO 40A Brushless ESC 2-4S Speed Controller with 5V 3A BEC for Fixed Wing DIY RC Multi-axis...
- Output Capacity: Continuous Current 40A, Short-Time Current 55A (Not Less Than 10 Seconds)
- BEC Output: 5V@3A (Linear Regulator Mode - Linear Mode) ; Power Input: 2-4 Lithium Batteries(Not Included)
- Maximum Speed: 210,000 RPM For 2-Pole Motor, 7000 RPM For 6-Pole Motor, 35,000 RPM For 12-Pole Motor
- Timing Can Be Changed To Be Suitable For Different Brushless Motors ; Compatible With Lipo And NIMH Battery
- Full Protection: Low Voltage Cutoff Protection / Over-Heat Protection / Throttle Signal Loss Protection (Warm tips: The ESC has been soldered out of...
Bestseller No. 15
Waterproof 35A ESC 2~3S Brushed Electric Speed Controller 5V/2A BEC for 1/14 1/16 1/18 RC Car Truck
- BEC Output: 5.0V/2A(analog mode)
- The strong resistant current capability, excellent heat dissipation.
- Easily programmed and compatible with pocket-sized program card.
- Specially designed for 1/18 1/16 1/14 RC car with excellent start-up, acceleration and linearity features.
- Multiple protection features: Low voltage cut-off protection for litium or nickel battery /Over-heat protectionThrote signal loss protection / Motor...
Bestseller No. 16
FLY RC 30A ESC RC Motor Brushless Speed Controller for RC Helicopter Airplane Multirotor
- No need to solder,more convenient,30A: an instant 45 A, 40A continuous 10 seconds,BEC output: 30A, stressed: 5 V 3A. 2LIPO 4-5 micro-steering gear 3...
- Compatible with: 400-450 helicopters / Aircraft or Quad-Rotor Multi RC Helicopter, good for quad-rotor KK multi-copter
- Protection, without Signal one second after the shutdown,security started, throttle position does not prohibit started temperature protection, the...
- Automatic selection 2-3 LIPO were protected voltage is 6 V/9V; automatically elected NIMH, each protected voltage is 0.8 V.
- The use of BEC, MCU separate power supply,and the use of speed control curve, automatically adapt to the accelerator, more suitable for remote control...
Bestseller No. 17
HOBBYWING QuicRun-WP-16BL30
- Proportional brake with 4 steps of maximum brake force adjustment and 8 steps of drag brake force adjustment.
- 9 steps of acceleration (/punch) adjustment from “soft” to “Very aggressive” to fit different kinds of models, tires and tracks.
- Multiple protections: Low voltage cut-off protection / Over-heating protection / Throttle signal loss protection / Motor lock-up protection.
Bestseller No. 18
HGLRC 4PCS 30A ESC 3S 4S 5S ESC BLHeli_S Electronic Speed Controller Support Dshot 150/300 / 600...
- Strong current endurance: Steady Input voltage 3S 4S 5S Lipo battery in Continuous current current 30A, max spoort to 40A(in 10s)
- Supported Protocols: Analog Signals - Multishot, One shot 42, Oneshot125, Digital Signals - Dshot 150, 300, 600
- Stable firmware: BLheli_S 16.5 is designed for superior performance in multirotors, and uses hardware upgradable
- Use top quality components: Imported Japanese Toshiba MOSFETs and Japanese Murata Ceramic Capacitors.3oz High-TG PCB board significantly reduces...
- Ultra-Small and Light footprint: 2g weight 26*14.5mm ESC with the Silicone Signal and Power Wires provides high heat-resistance and more flexibility
Bestseller No. 19
powerday 30A ESC Brushless Speed Controller BEC 2A for Quadcopter F450 X525(Pack of 2)
- - Cont. current: 30A -Max. current: 35A - BEC: 5V 2A (Linear mode）
- Size: 55x26x8mm (length 145mm including power cable) -Weight: ~22g
- Input Voltage: 2-3S lipo / 4-11 cell Ni-MH/Ni-Cd
- for sale is 2pcs 30A SimonK firmware Brushless ESC. Soldered with 3pcs 3.5mm gold female plug, very convenient to connect motor.
Having trouble finding a great Jmt 30a Brushless Esc?
This problem is well understood by us because we have gone through the entire Jmt 30a Brushless Esc research process ourselves, which is why we have put together a comprehensive list of the best Jmt 30a Brushless Escs available in the market today.
After hours of searching and using all the models on the market, we have found the best Jmt 30a Brushless Esc for 2023. See our ranking below!
How Do You Buy The Best Jmt 30a Brushless Esc?
Do you get stressed out thinking about shopping for a great Jmt 30a Brushless Esc? Do doubts keep creeping into your mind?
We understand, because we’ve already gone through the whole process of researching Jmt 30a Brushless Esc, which is why we have assembled a comprehensive list of the greatest Jmt 30a Brushless Esc available in the current market. We’ve also come up with a list of questions that you probably have yourself.
John Harvards has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Jmt 30a Brushless Esc that you consider buying. Your questions might include the following:
- Is it worth buying an Jmt 30a Brushless Esc?
- What benefits are there with buying an Jmt 30a Brushless Esc?
- What factors deserve consideration when shopping for an effective Jmt 30a Brushless Esc?
- Why is it crucial to invest in any Jmt 30a Brushless Esc, much less the best one?
- Which Jmt 30a Brushless Esc are good in the current market?
- Where can you find information like this about Jmt 30a Brushless Esc?
We’re convinced that you likely have far more questions than just these regarding Jmt 30a Brushless Esc, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Jmt 30a Brushless Esc, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Jmt 30a Brushless Esc. Make sure that you are only using trustworthy and credible websites and sources.
John Harvards provides an Jmt 30a Brushless Esc buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information.
How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Jmt 30a Brushless Esc currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Jmt 30a Brushless Esc has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Jmt 30a Brushless Esc?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Jmt 30a Brushless Esc.
- Customer Ratings: Number ratings grade Jmt 30a Brushless Esc objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Jmt 30a Brushless Esc.
- Product Quality: You don’t always get what you pay for with an Jmt 30a Brushless Esc, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Jmt 30a Brushless Esc is should be an indication of how long it will work out for you.
John Harvards always remembers that maintaining Jmt 30a Brushless Esc information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Jmt 30a Brushless Esc is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly!