Are you looking for the best Ez Go Pedal Box Assembly? Based on expert reviews, we ranked them. We've listed our top-ranked picks, including the top-selling Ez Go Pedal Box Assembly.
We Recommended:
- Golf Cart accelerator pedal box assembly for EZGO (PDS model only)
- Used on EZGO TXT 2000-up Electric and EZGO MPT-Workhorse 800 2004-up vehicles
- Replaces OEM parts# 73333-G05 73333G05
- Location of pedals that allows driver to control acceleration and braking of vehicle during operation, when worn, this item can cause the vehicle to...
- 100% satisfaction guarantee, 1 year refund or replacement!
- Used on 2008-current E-Z-GO Gas TXT, ST 400 (2009+), ST Sport (2009+), ST Sport II (2009+), ST Sport 2+2 etc
- Replacement pedal box assembly provides the vehicle with the ability to accelerate
- This accelerator pedal box should only be installed on the vehicles referenced with a short wheel base
- Used on 2002-2009 E-Z-GO Electric TXT(PDS), ST Sport, ST Sport II and Clays Car Models
- Location of pedals that allows driver to control acceleration and braking of vehicle during operation
- Made in United States
- Brand name: E-Z-GO
- Pedal box assembly provides the vehicle with the ability to accelerate, when worn, it can cause the vehicle to be stuck in the accelerated position,...
- Fits EZGO TXT 2000-up Electric and EZGO MPT-Workhorse 800 2004-up vehicles (Only PDS Models);
- Replace OEM Parts No: 73333-G05 ,73333G05 ;
- Meet or exceed OEM quality standards and very easy to install;
- Package include: E-Z-GO TXT 48-Volt Pedal Box Assembly with ITS Sensor.
- Used on 2000-current E-Z-GO Electric Vehicles with PDS, including TXT, ST Sport, ST Sport II, ST Sport 2 + 2 and Clays Car Models
- Enables the operation of the vehicle's FNR direction selector and Precision Drive System (PDS) controller
- Consists of main wire and 4 gauge wires with terminal ends
- Used on 1986-1990 E-Z-GO Marathon Models, with resistor-type speed controllers
- Responsible for absorbing heat energy; Dissipates energy
- Not for use on a vehicle with a solid-state speed controller; Weighs approximately: 3.47 lbs.
- High quality inductive throttle sensor is easy to install and replaces your worn or broken factory speed sensor
- Fits all EZGO TXT, DCS, Medalist and PDS electric golf cart models 1994 & UP
- OEM part number: 25854-G01
- Connects to direction selector through wiring harness
- Easy installation.Please contact us if you have any question of the item.10L0L enjoys a one-year warranty.
- Golf cart accelerator pedal box micro switch for EZGO TXT
- Fits EZGO TXT 1994-up gas(4 cycle) & electric Non-DCS(without the Drive Control System) models
- Replaces OEM part: 25861G01 25861-G01
- The micro switch is located on the Driver's side of the golf cart, under the floorboard
- Typically, if it clicks, it's working, if there is no clicking sound chances are it's broken and should be replaced
- Used on 1994-current vehicles with factory installed lights, or when adding factory brake lights to your vehicle
- Provides illumination in dark conditions and as a safety feature, allows other motorists to know when you're slowing down or stopping
- Made in United States
- Brand name: E-Z-GO
- Fit Models: This golf cart spring bushing kit is for Club Car DS 1981-up and EZGO TXT/Medalist 1994-up.
- High Quality: This golf cart spring bushing kit is made of high quality premium material and made of durable & long lasting rubber and sleeves to...
- OEM Replacements for EZGO TXT: Fit for EZGO TXT 1994-up gas and electric models, replace spring sleeve Part No#: 70289-G02, replace spring bushing...
- OEM Replacements for Club Car: Fit for Club Car DS 1981-up gas and electric models, replace spring sleeve Part No#: 1012303, replace spring bushing...
- Package Include: Complete set of leaf spring bushings (Both front and Rear Leaf Springs) and Upper suspension shackle bushings and sleeves. Contains 6...
- Good Quality: Made from black nylon, more durable that would not break or crack easily. Small things but great use, satisfy your demands
- High Precision: Can hold your parts very tightly, won't be loose as the time passing by, also can be easily removed without causing damage
- Reasonable Design: With compact size and light weight, it is very convenient for carrying. You can have them whenever you need them
- Universal Plastic Clips: Be widely used for door trim, radiator shield yoke, fender, bumper, grille and splash shield retainer replacement
- Package Include: 40PCS Nylon Fastener Rivet Clips
- UNIVERSAL FIT KIT - Great Assortment Push Retainer Kit with 12 popular size, fitting for door trim, radiator shield yoke, fender, bumper and splash...
- SAVE TIME AND MONEY - You can find 240PCS automotive push type retainer kit in the box and no need to go to a auto parts store to look for different...
- HIGH QUALITY - High quality material with heavy-duty construction for durability, this push type retainers set would not break or crack easily during...
- MOST COMMON SIZES - Don not worry about lost or damaged body fasteners. All the necessary retainers for exact replacement of old and broken retainer.
- EASY STORAGE - Comes with a plastic box with 12 compartments for organized storage. Compact size, convenient to store or carry with in your car.
- 【 WORKS FOR ALMOST ALL SITUATIONS】- The kit contains 19 types of most common sizes of fastener clips, cover 6mm to 10mm hole sizes replacement for...
- 【 IMPACT RESISTANT PUSH RIVETS】 - Well made of durable Nylon plastic, not easy to break or crack like other brands, it is super sturdy!
- 【 PREFECT FOR WHAT YOU NEED 】- Up to 425 pieces of retainer clips in a plastic box, allows to freely DIY your vehicle accessories at anytime you...
- 【 BONUS FASTENER REMOVER】 - Allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them. Easy access...
- 【 WIDELY APPLICATION】- Theses push clips are widely used for trim panel clips, door trim clips, door panel clips, bumper clips, Fender clips,...
- UNIVERSAL FIT KIT: - Great assortment push retainer kit with 16 most popular size, fitting for door trim, radiator shield yoke, fender, bumper, side...
- TOP QUALITY: - These car retainer clips are made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily...
- PREFECT FOR WHAT YOU NEED: - Up to 620 pieces of retainer clips in a plastic box, allows to freely DIY your vehicle accessories at anytime you wanted....
- BONUS ACCESSORIES: - We provide different size fastener removers and cable ties to help you quickly and easily remove car door panel and upholstery...
- Repair your pedal box with the ITS micro switch
- Our parts meet or exceed OEM quality standards. All of our parts are backed with 100% satisfaction guarantee!! What more could you ask for??
- Make sure your key switch is in the off position and your Tow/Run switch on your controller is in the Tow or Maintenance position before performing...
- Fits the Following Cart(s): EZGO Electric 1994-Up TXT PDS/DCS golf carts
- The TXT TIE ROD: Fits EZGO 36V Golf Carts, Years 2001 & Up.
- The tie rod ends Ball Joint for EZGO, Right-Hand Thread(included 1Pcs), OEM#70902-G02
- The Golf Cart Tie Rod: Set of (2) Right and Left Thread Tie Rod End,
- The Tie Rod Ends Ball Joint for EZGO,Left-Hand Thread(included 1Pcs),OEM#70902-G01
- Easy to install, high quality and 100% after-sale service satisfaction
- IMPACT RESISTANT PUSH RIVETS - Well made of durable Nylon plastic, not easy to break or crack like other brands, it is super sturdy!
- TOUGH FASTENER REMOVER- Durable Plastic and Metal material that has advantage of high abrasion resistance,allow you to quickly and easily remove car...
- APPLICATION: Widely used for door trim, fender, bumper, radiator shield yoke, side skirt, grille, engine cover and splash shield retainers.Better than...
- SIZES: One is measured Head Dia: 20mm; Stem Length: 22.8mm; Fits Into: 8mm hole. The other :Head Dia: 20mm; Stem length: 16 mm; fits: 10mm hole
- PACKAGE INCLUDED: 100 pcs universal 8 MM push-type plastic clips,50 pcs 10mm Nylon Bumper Fender Flare Fastener,1 pcs 5-inch Fastener Remover.
- Accelerator Micro Switch for EZGO Replaces OEM: 25861G01; ①Fits Gas (4 cycle) 1994-up. ②Fits Electric Non-DCS (without the Drive Control System)...
- Accelerator Pedal Box 2 Terminal Micro Switch, Repair your pedal box with the ITS micro switch.
- Accelerator Micro Switch for EZGO: Make sure your key switch is in the off position and your Tow/Run switch on your controller is in the Tow or...
- The Micro Switch Pedal box is located on the Driver's side of the golf car, under the floorboard; Typically, if it clicks-- it’s working, if there...
- Accelerator Micro Switch for EZGO: Easy Installation.
- FITS CARTS --for EZGO Electric 1994-Up TXT PDS/DCS golf carts
- PACKAGE INCLUDES -- 2 x 10896 Accelerator Micro Switch
- PREMIUM QUALITY -- The replacement part is made of top quality materials and well-tested by the manufacturer to ensure the best performance
- WARNING -- Make sure your key switch is in the off position and your Tow/Run switch on your controller is in the Tow or Maintenance position before...
- NOTE -- Non original aftermarket part.The product is not sponsored or endorsed by , or affiliated with the brands it fit including EZGO.
Having trouble finding a great Ez Go Pedal Box Assembly?
This problem is well understood by us because we have gone through the entire Ez Go Pedal Box Assembly research process ourselves, which is why we have put together a comprehensive list of the best Ez Go Pedal Box Assemblys available in the market today.
After hours of searching and using all the models on the market, we have found the best Ez Go Pedal Box Assembly for 2023. See our ranking below!
How Do You Buy The Best Ez Go Pedal Box Assembly?
Do you get stressed out thinking about shopping for a great Ez Go Pedal Box Assembly? Do doubts keep creeping into your mind?
We understand, because we’ve already gone through the whole process of researching Ez Go Pedal Box Assembly, which is why we have assembled a comprehensive list of the greatest Ez Go Pedal Box Assembly available in the current market. We’ve also come up with a list of questions that you probably have yourself.
John Harvards has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Ez Go Pedal Box Assembly that you consider buying. Your questions might include the following:
- Is it worth buying an Ez Go Pedal Box Assembly?
- What benefits are there with buying an Ez Go Pedal Box Assembly?
- What factors deserve consideration when shopping for an effective Ez Go Pedal Box Assembly?
- Why is it crucial to invest in any Ez Go Pedal Box Assembly, much less the best one?
- Which Ez Go Pedal Box Assembly are good in the current market?
- Where can you find information like this about Ez Go Pedal Box Assembly?
We’re convinced that you likely have far more questions than just these regarding Ez Go Pedal Box Assembly, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Ez Go Pedal Box Assembly, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Ez Go Pedal Box Assembly. Make sure that you are only using trustworthy and credible websites and sources.
John Harvards provides an Ez Go Pedal Box Assembly buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information.
How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Ez Go Pedal Box Assembly currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Ez Go Pedal Box Assembly has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Ez Go Pedal Box Assembly?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Ez Go Pedal Box Assembly.
- Customer Ratings: Number ratings grade Ez Go Pedal Box Assembly objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Ez Go Pedal Box Assembly.
- Product Quality: You don’t always get what you pay for with an Ez Go Pedal Box Assembly, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Ez Go Pedal Box Assembly is should be an indication of how long it will work out for you.
John Harvards always remembers that maintaining Ez Go Pedal Box Assembly information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Ez Go Pedal Box Assembly is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly!
Related Post:
- Best Pedal Patch Box
- Best Boss Pedal Box Set
- Best Electro Harmonix Voice Box Pedal
- Best Gift Box In A Box In A Box
- Best Box Inside A Box Inside A Box Present
- Best Powered Pedal Boards
- Best Mini Chorus Pedal
- Best Guitar Pedal Board With Case
- Best Husqvarna Reverse Pedal
- Best Pedal Cars For Older Kids